T47 threaded BB cups for T47 frames and 22/24mm diameter spindle cranks T47 threaded BB cups for T47 frames and 22/24mm diameter spindle cranks Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm Machined aluminum cups thread together directly into a T47 BB shell Bearings are easily serviced or replaced Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread **Please Note: may not work with Quarq SRAM/GXP cranksets (Elsa, Riken, SRAM Red 22, SRAM S975, SRAM S2275, CinQo Saturn, Saturn2) when used in BB shells with widths of 86.5mm and wider - If the Quarq spider has an ID less than 49.5mm, the crank may rub on the BB cup Compatible with Quarq DZero powermeter spiders with GXP spindles except Eagle MTB