Bb86/92 Bb

Black anodized machined aluminum cups
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out

Black anodized machined aluminum cups
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out

Machined AL6061 alloy cups
Sealed bearings
Shimano HTII 24mm and SRAM GXP 22/24mm spindle compatible

Cups for Campagnolo Ultra-Torque cranksets

Enduro BB86 to 30MM Sealed Bearings
Replace your BB86/92 bottom bracket with these flanged bearings and run BB30 cranks in your frame
For best results use 30mm crank spacers
Requires use of cranks with at least 100mm axle
Sold as a set - 2 bearings, spacers and dust cover

Two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame
Directly replaces all OEM BB86/92 bottom brackets
Overall width is still the same as all other BB86 bottom brackets
Improves bearing life and remedies creaking
**Please Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB`s

Two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame
Directly replaces all OEM BB86/92 bottom brackets
Overall width is still the same as all other BB86 bottom brackets
Improves bearing life and remedies creaking
**Please Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB`s

Allows the use of a BB386 EVO crankset on a press-fit BB86-Road (86.5x41mm) frame
Not compatible with Trek BB90 or BB30 systems
Stainless steel bearings

Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles
Replaces all standard BB86/92 press-fit bottom brackets
Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups

Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles
Replaces all standard BB86/92 press-fit bottom brackets
Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups

Precision machined AL6061 cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed dual-row premium flanged bearings
Designed for installing BB30 Wide, BB386, BB392, and other 30mm spindle cranks into BB86/92 frames*
*For use with 30mm diameter cranks with a spindle length of at least 104mm

One oversized spindle to work across every bottom bracket standard
Easier installation by allowing you to press the bearing cups into the frame
Significantly lighter than PFGXP system
Two fully sealed cartridge bearings

One oversized spindle to work across every bottom bracket standard
Easier installation by allowing you to press the bearing cups into the frame
Significantly lighter than PFGXP system
Two fully sealed cartridge bearings

Road application - Bearings and center tube differ from PressFit MTB
Easier installation by allowing you to press the bearing cups into the frame
Significantly lighter than PFGXP system
Two fully sealed cartridge bearings

Dual row flanged bearings used adapt a BB86/92 bottom bracket shell to fit 29mm spindle Sram DUB cranks
These bearings fit directly in frames with 41mm ID bottom bracket shells
Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell

This bottom bracket fits a Sram GXP crank on a BB86 and BB92 frames and includes road seals
Extremely reliable and efficient bottom brackets with coated ceramic bearings, tight variances and industry-leading durability
Reduced friction and better protection from nature`s elements
Long lasting durability and extreme performance

This bottom bracket fits a Sram GXP or Shimano/Rotor 24mm cranks on a BB86 and BB92 frames and includes cross seals
Includes machined reducer to be compatible with Shimano or Rotor 24mm cranks as well as Sram GXP 22/24mm
Extremely reliable and efficient bottom brackets with coated ceramic bearings, tight variances and industry-leading durability
Reduced friction and better protection from nature`s elements
Long lasting durability and extreme performance

Precision machined AL6061 cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed dual-row premium flanged bearings
Designed for installing Sram DUB 28.99mm spindle cranks into BB86/92 frames

Two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame
Directly replaces all OEM BB86/92 bottom brackets
Overall width is still the same as all other BB86 bottom brackets
Improves bearing life and remedies creaking
Abec-5 angular contact bearings

Two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame
Directly replaces all OEM BB86/92 bottom brackets
Overall width is still the same as all other BB86 bottom brackets
Improves bearing life and remedies creaking
Abec-5 angular contact bearings

This bottom bracket fits a Sram DUB crank set on a PressFit, BB86 (road) or BB92 (mountain bike) frame.
Extremely reliable and efficient bottom brackets with coated ceramic bearings, tight variances and industry-leading durability
Reduced friction and better protection from nature`s elements
Long lasting durability and extreme performance
Road rated seals not intended for off-road use

This bottom bracket fits most 30mm spindle cranks on BB86 and BB92 frames and includes Road seals
Extremely reliable and efficient bottom brackets with coated ceramic bearings, tight variances and industry-leading durability
Reduced friction and better protection from nature`s elements
Long lasting durability and extreme performance
*Note: Before ordering, check that your crank spindle is long enough for the wider BB shell. Traditional BB30 (typically pre-2014) and Specialized FACT crank sets will have a spindle that is too short for the frame shell

Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
OS versions are designed for use in frames with worn-out, oversized bottom bracket shells
Hybrid AL6061/Nylon fiber cups for a superior fit and noise free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles
Replaces all standard BB86/92 press-fit bottom brackets
Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups

Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
OS versions are designed for use in frames with worn-out, oversized bottom bracket shells
Hybrid AL6061/Nylon fiber cups for a superior fit and noise free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles
Replaces all standard BB86/92 press-fit bottom brackets
Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups

New patented external ring seal paired with an internal sleeve seal protects bearings from water and contaminants
Provides extremely efficient and smooth function as well as long lasting reliability
Mates with the external stainless steel bearings ??? which are attached to the crank arms as an integral unit rather than the BB cups for greater size and easier maintenance access
Available in multiple threaded and pressfit options
Bearings sold separately (#19160)
Compatible with Campy EKAR Pro-Tech cranks only

Threaded ABEC-3 bottom bracket for Fat Bike PF41 (BB121) and 24mm spindle diameter cranks
Machined cups thread together for stability, increased bearing life, and simple installation and maintenance
Frame must have a 41mm inner diameter, with a width of 121mm - If used on a shell with a 132mm width, the cups will overlap 3 threads max

The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability and strike a balance between value and lasting performance
6061-T6 machined aluminum cups
Cane Creek 1 year warranty

Composite shell
Sealed cartridge bearings
For use on SRAM GXP cranks with integrated 24mm spindle

Composite shell
Sealed cartridge bearings
For use on SRAM GXP cranks with integrated 24mm spindle