Bike Tools & Repair Equipment

• Three most popular TORX sizes: T10, T15 and T25mm

• Very compact 39-piece tool set for manual and machine use
• Perfect for a wide variety of screw connections with Zyklop Mini with 1/4" bit mounting, bitholding screwdriver or bit holder
• Green locking components to secure the tools
• Ideal for mobile use
• 1/4" bit ratchet, Kraftform bitholding screwdriver, BiTorsion bits (BTZ and BTH), Rapidaptor holder, adapter and 1/4" sockets

• The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.

• Quickly and accurately determine the wear and stretch of any chain

• Metal tire levers are used on wheels where mounting and dismounting the tires with plastic tire levers is difficult or impossible.
• Can be stuck behind the spoke, with help of the hook on the end of the lever

• Micro screwdriver set for precision mechanical work.
• Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below.
• Storage and transport in a robust belt pouch
• Ideal for E-bike and electronic application

• Handle/interchangeable blade system for rapide exchange of the blade
• Stubby screwdriver handle with short blade for hard to reach areas.
• Suitable for the mounting of bits with 1/4'' hexagon drive
• Strong permanent magnet, which also holds large and heavy screws.
• The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working.
• High-quality BiTorsion bits with a softer BiTorsion zone to prevent twisting of the bit tip under high loads.
• Compact, textile box with high robustness included

• Compact, foldable and highly accurate tool.
• Fits the bikes with the most common wheel sizes, including 26", 27.5"/650B, and 29"/700.
• Rotating Bottom Part for easy cleanse of the frame and accessories, allowing for seamless work around the wheel.
• Lockable measuring gauge, securely lock measurements in place to maintain accuracy while repositioning.
• Extended thread-in axle, providing additional clearance, perfect for full suspension frames.
• Sealed bearing ensures smooth operation of the thread-in axle and longevity.
• Handy gauge storage clips keep your measuring gauge conveniently stored and protected.

• Hex wrenches 4, 5, 6
• TX wrench 25
• PH1 screwdriver
• Flat screwdriver 1.0 x 5.0

• For clockwise and counterclockwise operation
• Torque Lock function: The torque function can be deactivated so that the tool can also be used for loosening
• With continuous bit mounting (1/4") for controlled clockwise and counterclockwise torque operation
• Extra click: audible and tactile torque setting
• Torque wrench gives an audible and tactile signal

• Works on all chains from 5 to 11 speeds

• Shimano®, SRAM®, Sun Tour®, Chris King® and Sun Race® and others.

• 29 bits set with a robust holder
• Can be potioned upright
• Rapidator technologie
• Hex-Plus technologie
• Torx Bo are ideal to work on E-bike motor

Include:
• Rapidaptor Universal Bit Holder,
• 2x PH 1, 3x PH 2, 1x PH 3
• 2x PZ 1, 3x PZ 2, 1x PZ 3
• TORX® bits: TX 10, 15, 20, 25, 30, 40
• TORX® BO bits with bore hole: TX 10, 15, 20, 25, 30
• Flat bits 5.5 x 25 mm
• Hex-Plus bits: 3, 4, 5, 6, 8mm

• Particularly suitable for narrow wrenching situations on the bike
• Joker 6003 pedal specifique size 15mm with flat mouth to mount and dismount pedals
• Special mouth geometry expands the placement possibilities of the tool
• High-quality surface treatment achieves a high and long-lasting corrosion protection.
• Low return angle in the mouth “takes” the screw every 15°
Includes:
• Joker 6003 size 6, 7, 8, 9 ,10, 11, 12, 13, 16, 17mm
• Joker Pedal wrench 15mm
• Joker pouch suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system

• 3/8'' Bit sockets for the most common TORX® and Hex screws
• Long bit sockets with extra slim, cylindrical profile zone for low-located couplings (e.g. for bottom bracket ball bearing or stem-fork-clamping)
• With extra slim 30mm long profile area
• With Take it easy tool finder: colour coding by size
• Knurling on lower socket end for more grip when used manually
Includes:
• Robust textile pouch
• Torx (TX25, TX30) socket
• Hex-Plus (4, 5, 6, 8, 10mm)

• Compact 41-piece screwdriving tool set for bicycle operations, also for mobile use
• Tool-Check with green locking elements to secure the tools
• Practical range for DIY assembly work and repairs
• Tools for the most popular screw profiles on road bikes, mountain bikes and e-bikes
• With Take it easy tool finder: colour coding by size

• Tire levers set made of glass fibre reinforced plastic
• Safely lever the tires off of the rim without damaging the rim
• 1/4” hexagon mounting in the tire lever allow the use of a 1/4” bit
• With valve core tool and deflater

• T-handle screwdriver for the transmission of particularly high torque
• Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working.
• Take it easy tool finder: colour coding according to profile and size
• With holding function (HF) on the long arm to securely hold the screw on the tool
• New metal rack

Includes:
• 454 T-Handle Hex-plus (2.5mm)
• 454 T-Handle Hex-Plus with HF (3, 4, 5, 6, 8, 10mm)
• 467 T-Handle Torx with HF (TX10, 20, 25)

• Multi-component Kraftform handle for fast and low-fatigue working.
• Hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer.
• Ductile tempered material prevents the blade from splintering or breaking.
• Comes with an impact cap for enhanced service life and reduced risk of splintering.
• Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit.
• Hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.

• Adaptor from square to hex.
• For 1/4" hex bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connecting series 1 and 4; with quick-release chuck.

• High quality L-key set with colour coded
• Wear-resistant clip material ensures secure storage of the L-keys as well as simple removal.
• Hex-Plus profile offers a greater contact surface in the head of the screw.
• Ballpoint on the long arm allows dependable working even in difficult installation situations.
• Holding function holds screws securely on the tool.
• The BlackLaser surface treatment provides surface protection, even against corrosion, and a long service life.
• Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing.

• High quality L-key set
• Colour coded
• Wear-resistant clip material ensures secure storage of the L-keys as well as simple removal.
• Hex-Plus profile offers a greater contact surface in the head of the screw.
• The ballpoint on the long arm allows dependable working even in difficult installation situations.
• The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life.
• Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing.

• Professional and torque-controlled screwdriving
• Quick clockwise/counterclockwise setting
• Five torque settings: 2.0, 3.0, 4.0, 5.0, 6.0 Nm
• Torque Lock position for unlimited loosening/tightening
• Quick-release holder
• Ideal for bikes
• Fits 1/4" hex bits

• 7-piece tool set
• Professional and torque-controlled screwdriving
• Quick clockwise/counterclockwise setting
• Five torque settings: 2.0, 3.0, 4.0, 5.0, 6.0 Nm
• Torque Lock position for unlimited loosening/tightening
• Quick-release holder
• Ideal for bikes
• Fits 1/4" hex bits
• Includes 6 bits (50 mm)
• Easy bit identification with color codes and labels

• Self-setting double spanners
• The self-setting Joker 6006 double spanners cover all metric and imperial dimensions in the respective field of application
• Automatically and continuously gripping hexagon screws and bolts
• Lever mechanism upon gripping prevents slipping and damage
• With mechanical ratchet functionality for fast and consistent screwdriving without removing the spanner

• The integrated ratchet with fine toothing ensures fast and safe working
• Reversing lever for comfortable clockwise/counterclockwise direction change
• Convenient working thanks to the ratchet mechanism fully embedded in the handle
• Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working
• Fast-rotating sleeve for extremely high working speed
• Rapidaptor bitholding screwdriver with fast-rotating sleeve for lightning-fast bit changes and high working speeds
• For bits with 1/4" external hexagon drive

• 6-piece screwdriver set with Kraftform Plus handle
• Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
• ''Take it easy'' Tool Finder: colour coding according to profile and size.
• The hexagonal anti--roll feature
• Includes practical rack for tidy storage of the screwdrivers.

• The wrench is the basic working tool for cyclists extended tours.
• Material: premium flex plus carbon steel. Surface finish: blacken to standard DIN 50938