Durable all-weather 100% post-consumer TUV-certified recycled polycarbonate blades
Mudflap is 40mm long to provide for extra coverage for your bike, back, and riding companions
Stainless steel stays and coated steel hardware are pre-installed
Includes all hardware to mount to bikes with brazed-on eyelets
Release Tabs on front fender for added safety
Rugged 6061 aluminum construction is corrosion resistant
100mm mudflaps provide ultimate coverage and are double - riveted for durability
Hardware is all stainless-steel and pre-installed for hassle-free mounting
Release Tabs on front fender for added safety
V-stays for added stability
Disc brake compatible
Meets EN test standards
Coated steel stays and hardware
Quick adjusting corrosion free hardware is pre-installed for hassle free mounting
Release tabs on front fender for added safety
Coated steel stays and hardware
Quick adjusting corrosion free hardware is pre-installed for hassle free mounting
Release tabs on front fender for added safety
Full mud coverage for your favorite fat bike
Quick and easy to attach and detach
Adjustable rear angle for perfect coverage
480mm length front and rear
353g per set
Full length fenders with built-in mud guards extend well below the axles for ultimate protection
Full length provides protection not only for the rider but those around them as well
Mounts and un-mounts in a matter of seconds once installed
Total length: Front - 675mm, Rear - 955mm
493g including fittings
Disc brake compatible
Clip-on style fender with extended mud flap for extra coverage
Quick and easy to attach and detach
Maximum tire size 25mm
Total Length: Front - 519mm, Rear - 680mm
355g per set
Larger width for wider street and cross style tires
Extremely light, aerodynamic and disc brake compatible
Optimal spray protection
Tool free mounting within seconds
Includes mud flap for additional spray protection
Total length: Front - 450mm, Rear - 620mm
307g per set
Rugged 6061 aluminum construction is corrosion resistant
100mm mudflaps provide ultimate coverage and are double - riveted for durability
Hardware is all stainless-steel and pre-installed for hassle-free mounting
Release Tabs on front fender for added safety
V-stays for added stability
Disc brake compatible
Meets EN test standards
Rugged 6061 aluminum construction is corrosion resistant
100mm mudflaps provide ultimate coverage and are double - riveted for durability
Hardware is all stainless-steel and pre-installed for hassle-free mounting
Release Tabs on front fender for added safety
V-stays for added stability
Disc brake compatible
Meets EN test standards
Rugged 6061 aluminum construction is corrosion resistant
100mm mudflaps provide ultimate coverage and are double - riveted for durability
Hardware is all stainless-steel and pre-installed for hassle-free mounting
Release Tabs on front fender for added safety
V-stays for added stability
Disc brake compatible
Meets EN test standards
Rugged 6061 aluminum construction is corrosion resistant
100mm mudflaps provide ultimate coverage and are double - riveted for durability
Hardware is all stainless-steel and pre-installed for hassle-free mounting
Release Tabs on front fender for added safety
V-stays for added stability
Disc brake compatible
Meets EN test standards
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class
Easy to install and easy to adjust, Roadrunners are a favourite of both cyclists and shop mechanics
Proprietary Axle Runners mount to almost any front or rear Q/R skewer to `create` eyelets
3M Reflex rear logo enhances visibility
Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class
Easy to install and easy to adjust, Roadrunners are a favourite of both cyclists and shop mechanics
Proprietary Axle Runners mount to almost any front or rear Q/R skewer to `create` eyelets
3M Reflex rear logo enhances visibility
Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class
Easy to install and easy to adjust, Roadrunners are a favourite of both cyclists and shop mechanics
Proprietary Axle Runners mount to almost any front or rear Q/R skewer to `create` eyelets
3M Reflex rear logo enhances visibility
Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class
Easy to install and easy to adjust, Roadrunners are a favourite of both cyclists and shop mechanics
Proprietary Axle Runners mount to almost any front or rear Q/R skewer to `create` eyelets
3M Reflex rear logo enhances visibility
Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
The big brother of the SKS Velo 65 is designed for coverage on 29` mountain bikes
Easy attachment is compatible with most frame styles and designs
The included U-Stay kit provides increased stability for the mudguard
Clip-on style fender with extended mud flap for extra coverage
Quick and easy to attach and detach
Maximum tire size 25mm
Total Length: Front - 519mm, Rear - 680mm
355g per set
Larger width for wider street and cross style tires
Extremely light, aerodynamic and disc brake compatible
Optimal spray protection
Tool free mounting within seconds
Includes mud flap for additional spray protection
Total length: Front - 450mm, Rear - 620mm
307g per set
Rugged 6061 aluminum construction is corrosion resistant
100mm mudflaps provide ultimate coverage and are double - riveted for durability
Hardware is all stainless-steel and pre-installed for hassle-free mounting
Release Tabs on front fender for added safety
V-stays for added stability
Disc brake compatible
Meets EN test standards
The SKS Speedrocker has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tires exceeding 32mm
Sturdy but lightweight black anodized aluminium stays have been designed wider than normal, to run over the top of the mudguard, and covered by a protective plate for maximum clearance
Protection is enhanced with a new dual-height front spoiler, which deflects water and mud onto the wheel and downwards, away from the rider???s face
The rear mudguard utilizes an innovative telescopic extension for greater coverage near the seat tube
Includes integrated recesses for brake or gear cables as required
Attaches via rubber mounts to the frame leaving eyelets free
Disc brake compatible
Flascheguard fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate
3.2mm 100% Recycled stainless steel support stays
Matte finish has the look of alloy, but won???t dent or bend, and has a more durable finish
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps keep feet dry, and eliminate rear spray
Support stays spaced for maximum stiffness and frame compatibility
Compatible with a wide range of suspension fork, disc brake, and thru-axle equipped bikes
Sold pre-assembled for quick mounting
Flascheguard fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate
3.2mm 100% Recycled stainless steel support stays
Matte finish has the look of alloy, but won???t dent or bend, and has a more durable finish
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps keep feet dry, and eliminate rear spray
Support stays spaced for maximum stiffness and frame compatibility
Compatible with a wide range of suspension fork, disc brake, and thru-axle equipped bikes
Sold pre-assembled for quick mounting
Flascheguard fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate
3.2mm 100% Recycled stainless steel support stays
Matte finish has the look of alloy, but won???t dent or bend, and has a more durable finish
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps keep feet dry, and eliminate rear spray
Support stays spaced for maximum stiffness and frame compatibility
Compatible with a wide range of suspension fork, disc brake, and thru-axle equipped bikes
Sold pre-assembled for quick mounting
Flascheguard fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate
3.2mm 100% Recycled stainless steel support stays
Matte finish has the look of alloy, but won???t dent or bend, and has a more durable finish
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps keep feet dry, and eliminate rear spray
Support stays spaced for maximum stiffness and frame compatibility
Compatible with a wide range of suspension fork, disc brake, and thru-axle equipped bikes
Sold pre-assembled for quick mounting
Flascheguard fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate
3.2mm 100% Recycled stainless steel support stays
Matte finish has the look of alloy, but won???t dent or bend, and has a more durable finish
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps keep feet dry, and eliminate rear spray
Support stays spaced for maximum stiffness and frame compatibility
Compatible with a wide range of suspension fork, disc brake, and thru-axle equipped bikes
Sold pre-assembled for quick mounting
Flascheguard fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate
3.2mm 100% Recycled stainless steel support stays
Matte finish has the look of alloy, but won???t dent or bend, and has a more durable finish
Glossy inner layer finish resists dirt and grime build-up
Extended fender lengths and duckbill mud flaps keep feet dry, and eliminate rear spray
Support stays spaced for maximum stiffness and frame compatibility
Compatible with a wide range of suspension fork, disc brake, and thru-axle equipped bikes
Sold pre-assembled for quick mounting
Pure Cycles mini fender sets feature durable alloy and PET composite construction
360mm rear and 350mm front provide full coverage from spashes and mud
Stainless steel mounting hardware for long wearing lifespan
All mounting hardware included
In stock
Receives in 6 days.
Choosing a selection results in a full page refresh.
