On Sale

Drive side axle spacers for Sram cranks

Podium-grade crankset preload adjuster made from aluminum with Grade 5 titanium hardware
Available for 30mm and DUB crank spindles like those from SRAM, Race Face and Easton and includes the spacer ring, thread ring, and a 2.5mm hex bolt
Threads onto the crank arm and backs off to remove play
Constructed for guaranteed performance and durability

Drive side axle spacers for Sram cranks

Used to adjust crank chainline or take up any slack when using 30mm, 24mm (Shimano, FSA, etc.) or 24/22mm (SRAM/TruVativ) Spindle Cranks in any BB30/PF30/BB86/92 or similar crank system
10 spacers per bag
Machined engineering-grade Delrin

Dub crank bolt and extracting cap
Compatible with Sram/Truvativ Dub cranksets only
M18 bolt with M30 self extracting cap

DUB axle spacer kit for DUB MTB bottom brackets
Includes two 3mm, one 5mm and one 7.5mm spacer

Comprehensive shop kit for bottom bracket and cassette/freewheel spacing needs
Kit Includes:
(20) 1.0mm FW Spacers
(10) 1.5mm FW Spacers
(10) 2.0mm FW Spacers
(10) NCS-4.5mm Cassette Spacers
(10) SHIM-.3MM Spacers
(10) SHIM-.5MM Spacers
(8) 0.5mm 24mm ID Spacers
(8) 1.0mm 24mm ID Spacers
(8) 2.5mm 24mm ID Spacers
(4) BB30-CLIPs
(4) BB30/PF30 Wave Washers
(4) GXP Wave Washers
(4) .7mm Bottom Bracket Spacers
(4) 1.8mm Bottom Bracket Spacers

Replacement left hand crank bolt kits for select Sram cranksets
Check with your sales rep or visit sram.com for compatibility

Podium-grade crankset preload adjuster made from aluminum with Grade 5 titanium hardware
Available for 30mm and DUB crank spindles like those from SRAM, Race Face and Easton and includes the spacer ring, thread ring, and a 2.5mm hex bolt
Threads onto the crank arm and backs off to remove play
Constructed for guaranteed performance and durability

Equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt
Fits Raceface 30mm Spindles, SRAM 30mm Spindles and SRAM 28.99 Dub Spindles
Includes 30mm and 28.99mm threaded inner rings

Sram preload kit for use with Dub bottom brackets
Includes screw, outer ring, flanged inner ring and flangeless inner ring

Replacement left hand crank bolt kits for select Sram cranksets
Check with your sales rep or visit sram.com for compatibility

Genuine replacement wave spring washer for BB30
Sold individually

Podium-grade crankset preload adjuster made from aluminum with Grade 5 titanium hardware
Available for 30mm and DUB crank spindles like those from SRAM, Race Face and Easton and includes the spacer ring, thread ring, and a 2.5mm hex bolt
Threads onto the crank arm and backs off to remove play
Constructed for guaranteed performance and durability

For ISIS BB
Chromoly
M15 thread

Replacement BB30 inner snap rings for when one inevitably goes shooting across the room never to be seen again

Equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt
Fits Raceface 30mm Spindles, SRAM 30mm Spindles and SRAM 28.99 Dub Spindles
Includes 30mm and 28.99mm threaded inner rings

For self extracting ISIS BB
M15 thread

For square taper BB
Chromoly
M8 thread

Fits Shimano and ISIS BBs. Single key release, sold in pairs.

Podium-grade crankset preload adjuster made from aluminum with Grade 5 titanium hardware
Available for 30mm and DUB crank spindles like those from SRAM, Race Face and Easton and includes the spacer ring, thread ring, and a 2.5mm hex bolt
Threads onto the crank arm and backs off to remove play
Constructed for guaranteed performance and durability

Fits Shimano and ISIS BBs
16mm ID x 20mm OD x 1.5mm Thick

For self extracting ISIS BB
Chromoly
M12 thread

8mm flanged bottom bracket nut
Sold individually

Equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt
Fits Raceface 30mm Spindles, SRAM 30mm Spindles and SRAM 28.99 Dub Spindles
Includes 30mm and 28.99mm threaded inner rings

For self extracting ISIS BB
M15 thread

Equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt
Fits Raceface 30mm Spindles, SRAM 30mm Spindles and SRAM 28.99 Dub Spindles
Includes 30mm and 28.99mm threaded inner rings

Designed for installing 24mm or 24/22mm spindle cranks into BB30 frames without the need for any adapters.
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out

Genuine FSA replacement parts