Pf30/bb386 Bb

Converts non-threaded 46mm press-fit BB shells to accept most 24mm or 24/22mm spindle cranks
For installation into PF30 frames without the need for adapters
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out

Converts non-threaded 46mm press-fit BB shells to accept most 24mm (Shimano type) spindle cranks without the need for adapters
Enduro ABEC 5 Angular Contact sealed bearing in drive side cup
Enduro ABEC 3 sealed bearing in non-drive side cup
Dual silicone seal keeps the contamination out

Converts non-threaded 46mm press-fit BB shells to accept most 24mm or 24/22mm spindle cranks
For installation into PF30 frames without the need for adapters
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out

Converts non-threaded 46mm press-fit BB shells to accept most 24/22mm (GXP) spindle cranks without the need for adapters
Enduro ABEC 5 Angular Contact sealed bearing in drive side cup
Enduro ABEC 3 sealed bearing in non-drive side cup
Dual silicone seal keeps the contamination out

Cups for Campagnolo Ultra-Torque cranksets
EPS compatible

Cups for Campagnolo Ultra-Torque cranksets
EPS compatible

Two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame
Directly replaces all OEM PF30 bottom brackets
Improves bearing life and remedies creaking
Compatible with PF30, PF30A, BBRight Press Fit and Specialized Carbon OSBB* (*requires spacers for 61mm shell)

Available with composite or composite/ceramic cups in a 68/92 or 68/73 shell
For use on SRAM BB30 cranks with a 30mm spindle
Sealed cartridge bearings

Ceramic catridge bearing
For use on FSA BB30 cranks with a 30mm spindle

Chrome steel cartridge bearings
For use on FSA BB30 cranks with a 30mm spindle

Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm or SRAM GXP 22/24mm spindle cranks into PF30 frames without the need for adapters
Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups

Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm or SRAM GXP 22/24mm spindle cranks into PF30 frames without the need for adapters
Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups

Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing BB30 Wide or BB386 30mm spindle cranks into PF30 or BB386 frames
Note: Spindle length must be 104mm or longer when used in a 68mm wide shell, 108mm or longer when used in a 73mm wide shell
Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups

Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, or DUB spindle cranks into BB386 frames without the need for adapters
Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups

Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, or DUB spindle cranks into BB386 frames without the need for adapters
Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups

One oversized spindle to work across every bottom bracket standard
Mountain and Road, Includes 3mm spacer
PressFit cups for lighter weight
Greater bearing durability
Integrated adjuster
Easy installation
*Part number 610747 recommended for installation

Threaded BB for 386EVO frames and 24mm diameter spindle cranks
Machined cups thread together for stability, increased bearing life, and simple installation and maintenance
Enduro Angular Contact bearings

Threaded BB for 386EVO frames and 22/24mm diameter spindle cranks
Machined cups thread together for stability, increased bearing life, and simple installation and maintenance
Enduro Angular Contact bearings
**Please Note: will not work with Quarq SRAM/GXP cranksets (Elsa, Riken, SRAM Red 22, SRAM S975, SRAM S2275, CinQo Saturn, Saturn2). If your Quarq spider has an ID less than 49.5mm, your crank may rub on the BB cup
Compatible with Quarq DZero powermeter spiders with GXP spindles except Eagle MTB

For frames that have BB386 BB shells. 86.5mm shell width, and 46mm diameter hole
Easy installation
PressFit cups for lighter weight
Integrated adjuster

Frame specific left cup, Cervelo compatible
One oversized spindle to work across every bottom bracket standard.
PressFit cups for lighter weight
Greater bearing durability
Integrated adjuster
Easy installation

Road PressFit 30 bottom bracket with Cannondale specific left cup - 73mm shell
One oversized spindle to work across every bottom bracket standard.
PressFit cups for lighter weight
Greater bearing durability
Integrated adjuster
Easy installation

PressFit 30 Road Bottom bracket, Cannondale specific asymmetric 83mm shell width
One oversized spindle to work across every bottom bracket standard
PressFit cups for lighter weight
Greater bearing durability
Integrated adjuster
Easy installation

Specifically designed for installing 24mm spindle diameter cranks (Shimano, Etc.) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters
Two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance
Enduro ABEC-3 bearings
Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work!

Specifically designed for installing 22mm / 24mm spindle diameter cranks (SRAM / Truvativ GXP) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance
Enduro ABEC-3 bearings

By popular demand, Wheels Mfg added this PF30 with outboard bearing BB for use with 30mm spindle cranksets when used in PF30 frames to the line up
The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance
**Please Note: Spindle length must be 103mm or longer when used in a 68mm wide shell, 108mm or longer when used in a 73mm wide shell.

PF30 with outboard bearing BB for use with 29mm spindle SRAM DUB cranksets when used in PF30 frames
The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance
Can be used with 61mm to 73mm BB shells - 61mm shells require spacers not included
*Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers

This bottom bracket fits any Rotor/Shimano 24mm, or GXP (with included reducer) crank on a PF30 frame
Extremely reliable and efficient bottom brackets with coated ceramic bearings, tight variances and industry-leading durability
Reduced friction and better protection from nature`s elements
Long lasting durability and extreme performance

Fits any BB30 crank on a PF30 frame
Fits a BBRight crank on a BBRight frame (Rotor and FSA Complete Bikes); 386EVO, Rotor 30mm, Campagnolo OT crank on a 386EVO frame; most 30mm crank spindles on a 386EVO frame
Extremely reliable and efficient bottom brackets with coated ceramic bearings, tight variances and industry-leading durability
Reduced friction and better protection from nature`s elements
Long lasting durability and extreme performance

Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Sram DUB 28.99mm spindle cranks into PF30 frames

For replacing OEM PF30 bottom brackets or for new bike builds
The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance
Enduro contact bearings