Rear Derailleurs MTB

The strongest DH derailleur available. Period. The DH-focused design is ready for World Cup start huts or the gnarliest freeride lines. Shift when and where you want, whether it’s the start ramp or sprinting full gas to the line.
• Hangerless Interface and Full Mount attachment allow for the most precise shifting and the ultimate resistance to impact
• Install and pair via the reliable and familiar standard AXS set-up and pairing procedure.
• Replaceable skid plates, outer parallelogram link, and rebuildable thread-on cage assembly
• Most robust DH-specific Inline Cage features flat outboard surface for easy maintenance
• Type 4 damper results in very quiet operation through the roughest tracks
• T-Type chain compatibility only
• SRAM Model ID: RD-XX-DHE-A1
• Battery Sold Separately

• Full Mount Design (UDH frame required)
• T-Type compatibility
• Most robust mechanical derailleur
• Replaceable skid plates, outer and inner parallelogram link, cage or cage assembly
• The most rebuildable derailleur in the Eagle Transmission Ecosystem
• T-Type cable actuation ratio
• SRAM Model ID: RD-90-A1

• T-Type Flattop design
• Polished Steel finish
• Solid pins, fully approved for E-MTB use
• SRAM Model IT: CN-TTYP-70-A1

• Integrated Hall Lock lever stabilizes derailleur and eases wheel removal
• Horizontal parallelogram stabilizes rear derailleur while riding over rough terrain
• Instant, silent clutch
• Carbon Fiber Outer Cage
• Cage release function eases wheel removal by removing chain tension
• 12/14t pulleys with optimized mud evacuation channels

• Integrated Hall Lock lever stabilizes derailleur and eases wheel removal
• Horizontal parallelogram stabilizes rear derailleur while riding over rough terrain
• Instant, silent clutch
• Carbon Fiber Outer Cage
• Cage release function eases wheel removal by removing chain tension
• 12/14t pulleys with optimized mud evacuation channels

The GX Eagle Transmission derailleur delivers everything an Eagle Transmission derailleur possibly can, and then some.
• Full Mount Design (UDH frame required)
• Revised battery position and a reconfigured gearbox to better protect itself from impacts.
• Replaceable protective skid plates and two-piece outer link
• Hangerless Interface mounts around the wheel axle itself and making direct contact with the cassette with no hanger required.
• Install and pair via the reliable and familiar standard AXS set-up and pairing procedure
• AXS battery sold separately
• SRAM Model ID: RD-GX-E-B1

Engineered with an ultra-strong but ultra-light design that utilizes carbon fiber with a hollow core maximized for title winning stiffness. Now pair it with the remarkable new XX SL Eagle Transmission (T-Type) direct mount chainring, and the spotlight turns from its performance to its appearance, because it absolutely looks like nothing you’ve ever seen before.

• XX SL Eagle Transmission Crank: Ultra-strong, incredibly light hollow-core carbon fiber design
• XX SL Eagle Transmission Chainring: Never before seen appearance
• SRAM Model ID: FC-XX-SL-D1

Whether on the starting line or not, the X0 Eagle Transmission (T-Type) derailleur brings competition-tested prowess to riders who let their riding prove everything. Engineered as integrated and interdependent transmission components, the X0 Eagle Transmission derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface. The Full Mount attachment method creates a far stronger connection that grips both sides of the frame. Featuring an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the B-knuckle and outer link that are fully replaceable, or upgradeable to the XX skid plate.

• Hangerless Interface, Full Mount attachment method. (UDH compatible frame required)
• Replaceable B-Knuckle cover and outer link.
• Battery Not Included
• SRAM Model ID: RD-X0-E-B1

Carbon fiber engineered with a foam core to give both incredible strength and maximized stiffness. Now pair it with the remarkable new XX Eagle Transmission (T-Type) direct mount chainring, and the spotlight turns from its performance to its appearance, because it absolutely looks like nothing we’ve ever seen before. The XX Eagle Transmission crank also features first-of-its-kind removable and replaceable bash guards that riders will appreciate.

• XX Eagle Transmission Crank: Carbon with foam core. Light with maximized stiffness.
• XX Eagle Transmission Chainring: Stunning, never-before-seen look. T-Type compatibility and a removable bash guard.
• SRAM Model ID: FC-XX-D1

• 11-34T
• Weight - 354g

• A full featured Eagle derailleur, compatible with the Eagle Colorsystem.
• X-SYNC pulley technology provides greater efficiency, crisper shifting, and quieter operation.
• Cage Lock offers discovery-level riders easy wheel removal.
• SRAM Model ID: RD-SX-1-B1

• AXS enabled componentry software that makes it possible to both program and personalize
• Overload Clutch protection
• Compatible with all AXS ecosystem controllers, and Eagle mechanical components
• Battery sold separately
• SRAM Model ID: RD-GX-1E-A1

• Hall Lock
• G-Spec Ratchet Clutch
• G-Spec finishing touches:
• Carbon fiber cage & Upper link
• Extra wide parallelogram pivot
• Sealed cartridge bearings pulleys

• Updated cage provides better chain retention and more precise shifts.
• Compatible with 10-50t and 10-52t cassettes.
• SRAM Model ID: RD-XX-1-B2

• The Eagle AXS derailleur is the brain of the whole AXS system
• Shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from
mechanical Eagle
• Battery not included
• SRAM Model ID: RD-X0-1E-A1

• Updated cage provides better chain retention and more precise shifts.
• Compatible with 10-50t and 10-52t cassettes.
• SRAM Model ID: RD-X0-1-B2

• Refined to work with both 10-52T and 10-50T cassettes
• Updated cage architecture provides better chain retention and precise shifts.
• SRAM Model ID: RD-GX-1-B2

• The Eagle AXS derailleur is the brain of the whole AXS system
• Shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle
• Battery not included
• SRAM Model ID: RD-XX-1E-A1

• X-ACTUATION™ for precise and dependable 7-speed performance
• Fully compatible with the SRAM X01 DH drivetrain
• X-HORIZON™ design that reduces shift force, ghost shifting and cage slap
• 12-tooth X-SYNC™ pulley wheels
• SRAM Model ID: RD-GX-1DH-A3

• Built high and tight to steer clear of the trail.
• CAGE LOCK™ makes wheel changes simple and quick.
• Pair with X01 DH™ 7-speed shifter for full X-ACTUATION™ technology.
• SRAM Model ID: RD-X0-1DH-A3

• X-HORIZON design that reduces shift force, ghost shifting and chain slap
• 12-tooth X-SYNC pulley wheels
• Fully compatible with all SRAM 1x drivetrains
• X-HORIZON, X-SYNC, X-ACTUATION, CAGE LOCK, and ROLLER BEARING CLUTCH technologies
• SRAM Model ID: RD-NX-1-A1

• GX provides the widest 2x11 gear range available.
• X-ACTUATION technology eliminates slop and shifting variation
• ROLLER BEARING CLUTCH technology delivers maximum drivetrain stability
• 10-42 Compatible
• SRAM Model ID: RD-GX-11-A1

• X-Actaution for precise and dependable 11-speed performance
• X-HORIZON design reduces shift force and ghost shifting
• TYPE 2.1 technologies: ROLLER BEARING CLUTCH and CAGE LOCK
• 12-tooth X-SYNC™ pulley wheels
• Large upper pulley offset automatically adjusts chain gap
• SRAM Model ID: RD-GX-1-A1

• Exact Actuation for precise and dependable 10-speed performance
• TYPE 2.1 technologies: ROLLER BEARING CLUTCH and CAGE LOCK
• SRAM Model ID: RD-GX-T21-A1

• X-HORIZON technology
• ROLLER BEARING CLUTCH technology
• CAGE LOCK technology
• X-ACTUATION technology
• 12T X-SYNC pulley wheels
• Silent pulley tooth design
• Weight: 256g
• SRAM Model ID: RD-X-1-A2

• 13-30T
• Indexed Adjuster
• Weight - 230g to 270g

• Weight 299g long /290g medium
• Speeds 9/8
• Technology 1:1™ actuation ratio and Direct Route Technology for lighter effort shifting.
• Compatibility 1:1
• SRAM Model ID: RD-X5-A1

• Weight 299g long /290g medium
• Technology Exact Actuation Ratio and Direct Route Technology for lighter effort shifting.
• Compatibility Exact Actuation
• SRAM Model ID: RD-X5-A1

• X-HORIZON technology
• ROLLER BEARING CLUTCH technology
• CAGE LOCK technology
• X-ACTUATION technology
• 12T X-SYNC pulley wheels
• Silent pulley tooth design
• Weight: 220g
• SRAM Model ID: RD-X0-1-A2

• X-HORIZON technology
• ROLLER BEARING CLUTCH technology
• CAGE LOCK technology
• X-ACTUATION technology
• 12T X-SYNC pulley wheels
• Silent pulley tooth design
• Weight: 220 grams (approx.)
• SRAM Model ID: RD-XX-1-A2