T47

T47 threaded BB cups for T47 frames and 30mm diameter spindle cranks
Cups have internal bearings, and can be used in BB shells with widths from 68mm to 132mm
Machined aluminum cups thread together directly into a T47 BB shell
Bearings are easily serviced or replaced
Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread

T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks
Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm
Machined aluminum cups thread together directly into a T47 BB shell
Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread
Bearings are easily serviced or replaced

T47 threaded BB cups for T47 frames and 22/24mm diameter spindle cranks
Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm
Machined aluminum cups thread together directly into a T47 BB shell
Bearings are easily serviced or replaced
Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread
**Please Note: may not work with Quarq SRAM/GXP cranksets (Elsa, Riken, SRAM Red 22, SRAM S975, SRAM S2275, CinQo Saturn, Saturn2) when used in BB shells with widths of 86.5mm and wider - If the Quarq spider has an ID less than 49.5mm, the crank may rub on the BB cup
Compatible with Quarq DZero powermeter spiders with GXP spindles except Eagle MTB

T47 Outboard Angular Contact BB for 30mm cranks
Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm
Includes a sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle
Machined aluminum cups thread together directly into a T47 BB shell
Bearings are easily serviced or replaced
**Please Note: T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread - use grease when installing in aluminum or steel and an anti-sieze compatibile with titanium shells

T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks
Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm
Machined aluminum cups thread together directly into a T47 BB shell
Bearings are easily serviced or replaced
Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle

T47 threaded BB cups for T47 frames and 22/24mm diameter spindle cranks
Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm
Machined aluminum cups thread together directly into a T47 BB shell
Bearings are easily serviced or replaced
Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread

Thread-in T47 bottom bracket for use with road bikes and DUB spindles
One oversized spindle to work across every bottom bracket standard
Greater bearing durability
Easy installation
Threaded internal cups for integrated look

The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability and strike a balance between value and lasting performance
6061-T6 machined aluminum cups
Cane Creek 1 year warranty

The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability and strike a balance between value and lasting performance
6061-T6 machined aluminum cups
Cane Creek 1 year warranty

Compatible with 24mm/GXP spindles with included step down reducer for non-drive side
While Trek T47 bottom brackets are 1mm narrower than standard 86.5mm wide T47 shells, this falls well within the adjustment range of any crank set - The same bottom bracket can be used for both setups
All Kogel Bearings T47 ceramic bottom brackets can be installed with Enduro TorqTite-compatible tool

Compatible with DUB spindles in an internal T47 interfaced frame
While Trek T47 bottom brackets are 1mm narrower than standard 86.5mm wide T47 shells, this falls well within the adjustment range of any crank set - The same bottom bracket can be used for both setups
All Kogel Bearings T47 ceramic bottom brackets can be installed with Enduro TorqTite-compatible tool

The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability and strike a balance between value and lasting performance
6061-T6 machined aluminum cups
Cane Creek 1 year warranty

Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, SRAM DUB 28.99mm, and BB386/392 30mm spindle cranks into T47 threaded frames
Inboard thread-in bottom brackets are compatible with 85.5/86.5/92mm wide T47 shells
Uses BB tool compatible with 16 notch x 48.5mm bearing cups

Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, SRAM DUB 28.99mm, and BB386/392 30mm spindle cranks into T47 threaded frames
Inboard thread-in bottom brackets are compatible with 85.5/86.5/92mm wide T47 shells
Uses BB tool compatible with 16 notch x 48.5mm bearing cups

Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, SRAM DUB 28.99mm, and BB386/392 30mm spindle cranks into T47 threaded frames
Inboard thread-in bottom brackets are compatible with 85.5/86.5/92mm wide T47 shells
Uses BB tool compatible with 16 notch x 48.5mm bearing cups

Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, SRAM DUB 28.99mm, and BB386/392 30mm spindle cranks into T47 threaded frames
Inboard thread-in bottom brackets are compatible with 85.5/86.5/92mm wide T47 shells
Uses BB tool compatible with 16 notch x 48.5mm bearing cups

Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, SRAM DUB 28.99mm, and BB386/392 30mm spindle cranks into T47 threaded frames
Outboard thread-in bottom brackets are compatible with 68/73mm wide T47 shells
Uses BB tool compatible with 16 notch x 48.5mm bearing cups

Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, SRAM DUB 28.99mm, and BB386/392 30mm spindle cranks into T47 threaded frames
Outboard thread-in bottom brackets are compatible with 68/73mm wide T47 shells
Uses BB tool compatible with 16 notch x 48.5mm bearing cups

Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, SRAM DUB 28.99mm, and BB386/392 30mm spindle cranks into T47 threaded frames
Outboard thread-in bottom brackets are compatible with 68/73mm wide T47 shells
Uses BB tool compatible with 16 notch x 48.5mm bearing cups

Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation
Low-friction dual seals protect the bearings from harmful contaminants
Sealed premium bearings are both serviceable and replaceable
Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, SRAM DUB 28.99mm, and BB386/392 30mm spindle cranks into T47 threaded frames
Outboard thread-in bottom brackets are compatible with 68/73mm wide T47 shells
Uses BB tool compatible with 16 notch x 48.5mm bearing cups

T47 threaded BB cups for T47 frames and 29mm diameter spindle SRAM DUB compatible cranks
Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle
Cups have internal bearings, and can be used in BB shells with widths from 86mm to 121mm
Machined aluminum cups thread together directly into a T47 BB shell
Bearings are easily serviced or replaced

T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks
Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle
Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm
Machined aluminum cups thread together directly into a T47 BB shell
Bearings are easily serviced or replaced

T47 threaded BB cups for T47 frames and M30 28/30mm spindle diameter Praxis - compatible cranks
Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle
Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm
Includes BB with bearings, silicone dust seals, 28mm insert, and an assortment of spacers
Machined aluminum cups thread together directly into a T47 BB shell
Bearings are easily serviced or replaced