Threadless Stems

• 3D forged, black
• clamp 31.8 mm
• 1 1/8" diameter
• made of 3D forged aluminium

• Naoto Tamaru signature flatland stem
• Super short 40mm reach cnc machined stem
• Lower 30mm stack height
• Can be run with 18mm rise, or flipped at 12mm rise
• SHARK TOOTH CLAMPING (STC) linear knurling to prevent bar slip
• Smaller profile bolts to reduce weight

• Flatland specific 33mm reach version
• Front load design with more rise
• Wider faceplate to prevent bar slip
• Material saving and unique look recessed top cap section for flush fit
• Recessed top cap section for flush fit
• Hollow center for light weight
• Unique offset rear for improved clamping

• Kieryo Kudo signature street/flatland stem
• Super short 45mm reach
• Knee-friendly rounded edges
• Recessed top cap section for flush fit
• SHARK TOOTH CLAMPING (STC) linear knurling to prevent bar slip
• Larger head bolts for more clamping power

• Simpler design, wider faceplate, and larger head 6mm hex bolts
• Top load stem
• Weight saving internal machining

• Less fatigue = maximum performance
• Up to 20mm of tunable compliance
• Swappable elastomers, and on-the-fly compliance switch

•M6 bolts
•Wide clamping area spreads load over large area
•1 piece faceplate
• CNC machined in Whistler, Canada
•Faded edges alleviates stress on bars under flex
•1-1/8" steerer
•6061 aluminum

•M6 bolts
•Wide clamping area spreads load over large area
•1 piece faceplate
• CNC machined in Whistler, Canada
•Faded edges alleviates stress on bars under flex
•1-1/8" steerer
•6061 aluminum

• 6061 premium alloy
• Designed to be light and strong
• Enduro/DH focused
• 31.8 & 35mm clamp

• Crafted from domestically-sourced 7075 aluminum billet
• 180 degrees of handlebar contact on the stem body for twist-free security that will play nice with both alloy and carbon bars
• Stainless steel hardware ensures everything stays in place and looks great, regardless of mud-blasting washes or rainforest climates.
• Machined, anodized and assembled entirely in Asheville, NC

• Crafted from domestically-sourced 7075 aluminum billet
• 180 degrees of handlebar contact on the stem body for twist-free security that will play nice with both alloy and carbon bars
• Stainless steel hardware ensures everything stays in place and looks great, regardless of mud-blasting washes or rainforest climates.
• Machined, anodized and assembled entirely in Asheville, NC

• Lightweight, performance stem designed for trail and cross-country use
• All fasteners are adjustable via a T25 tool for easy, quick adjustments
• Includes GoPro mount.
• SRAM Model ID: ST-ATMS-7K1-A1

• Specifically tuned to be more shock absorbing than the “comfort” seatposts on the
market, while still passing our strict internal MTB strength test.
• Flex engineered into the light weight carbon tube keeps the rider comfortable over any terrain.
• Secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the
head has been redesigned for maximum bolt head accessibility.
• Clamp works with all saddle rail types.
• SRAM Model ID: SP-SC-SL-C2

• Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters.
• Includes its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body
• Matte Black finish
• Zipp QuickView integrated mount available separately
• SRAM Model ID: ST-SL-SPNT-A3

• 3D forged and CNC machined AL6061/T6
• 4-bolt cold forged alloy faceplate
• Cr-Mo bolts
• 40 mm stach height
• 122 g (70 mm)

• 3D Forged and CNC machined from AL7050/T73
• 3D Forged AL6061/T6 faceplate
• 4-bolt cold-forged alloy faceplate
• Cr-Mo hardware
• 40mm fork clamp stack height
• 162g (80mm)

• 3D forged and CNC machined AL2014
• 4 bolt sculpted faceplate with titanium hardware
• 40mm stack height
• 113g (100mm)

• 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
• Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
• Titanium hardware and lightweight aluminum faceplate
• 107g

• 3D Forged Easton EA90 alloy
• Ti bolts
• Includes Easton ICM Integrated Garmin computer Mount
• Distributed Stress Technology and Top-Lock™ faceplate to maximaze the handlebar/stem interface
• Clamp diameter: 31.8mm
• Weight: 110g (100mm)

• Winning weight, extraordinary strength
• Ti bolts
• 3D Forges EA90 alloy
• Includes Easton ICM Integrated Garmin Mount
• Patented DST™ distributes clamping forces mor evenly over a larger area
• Clamp diameter: 31.8mm
• Weight: 120g (100mm)

• Aerodynamically honed stem with adjustable length and angle to optimize your position
• The rider makes up 80-90% of total aero drag, so refining position can produce some of the biggest aero gains of all.
• Included shims allow change of +/– 2.5mm in reach at -12°, or adjust the angle to -7° or -17°

The new M6 is the everyday, any-trail wheel designed for long rides in the mountains — where reliability matters as much as every gram shaved. It's built off what we learned from our M5 Pro race wheel, with an all-new shape and carbon layup to deliver more traction, durability, and comfort than anything else in its class. Like all new M Series wheelsets, the M6 features unique rim shapes and construction front and back and is built to ENVE’s proven INNERDRIVE mountain hubs.

• A durable and lightweight, high strength, carbon bodied mountain stem built for 35mm handlebars, aggressive riding, and the muscular look of today’s carbon Enduro and All-Mountain bikes.

• The Renthal Apex combines All Mountain strength, Enduro stiffness and XC lightweight
• The Apex is fully CNC machined
• Designed to ride faster, jump further and last longer.

• Forged EA50 alloy for toughness
• Patented DST distributes clamping forces over a larger area
• Clamp diameter: 31.8mm
• Weight: 160g (100mm)

• High performance CNC machined stem
• Enduro, All-Mountain focused
• 0-degree rise
• TopLock faceplate design for easy installation
• 42mm stack
• 138g (50mm)

• Fully CNC machined
• Featuring an oversize center bore
• Extensive machining and external webbing to maximise structural strength and stiffness and minimise weight

• 3D forged 7050
• CNC machined for weight reduction
• Four bolt handlebar clamp
• Two bolt steerer clamp
• SRAM Model ID: ST-DESC-5-B1

• Contoured surfaces for human contact and structural optimization
• High polished finish
• Low stack height
• Weight: 200g (50mm)