• Accepts wheels from 16 to 29 inch with or without tire
• Supports hubs up to 157 mm width. Truing of 20 mm or other dimension axle wheels requires additional adaptors.
• The calipers enable simultaneous radial control of the wheel position on both sides, with an additional possibility to control radial symmetry in relation to the hub.
• The calipers have plastic coated tips to prevent scratching the rim.
• Spring loaded upright arms and the caliper arm can be quickly pulled away, automatically springing back to a set position when inserting a new wheel
• Precisely manufactured tools enable simple checking of wheels with dimensions from 16 to 29 inch, with or without tire
• Designed to check the axle symmetry between the hub and the wheel rim
• Threading nipples to the spokes is the most time consuming part of building wheels. Thanks to the speed nipple bit you can now do it with the cordless screwdriver, save yourself some time and still have all the nipples threaded on the spokes to the same depth.
• Works with conventional nipples
• Professional wheel centering stand arm can get out of center after being used frequently. Controlling caliper arm enables us, to calibrate the stand arm back to its center position.
• With the Velcro strap the tool can be mounted to any front fork and rear seat stay of the frame
• The indicator is then used normally as on other truing stands. The tool can be also used for truing rotors
• Light and small and easily fits in any backpack
• A must have wheel building tool. Rotating handle and the guide shape enables you to quickly screw the nipple onto the spoke. It supports standard shape nipples.
• The smaller end is used for nipples with a 6.4mm outside diameter, while the larger end is used for assembling and disassembling for tubeless Mavic rim inserts.
• For removing hub end caps while servicing the hubs or converting them to different standards
• Thanks to the expanding mechanism, which grabs the hub cap evenly from the inside, even the most stubborn hub end caps are easy to pull-off. Compared with the traditional way of removing hub end caps, this tool won´t damage cups or hub.
• 1751/2DT screwdriver is used for DT Swiss® SQUORX nipples with torx shaped top head. The 80mm long stem enables work with deep aero rims as well as with all the normal rims.
• Unior’s 1689.6 Lefty adaptor is used for truing Cannondale’s Lefty® front wheels, which have specific asymmetric shape and dimension and therefore cannot be used on the centering stand with normal adaptors.
• Premium Spoke Wrench with 3-Side and 4 Side Openings and Reversible Handle
• Investment cast, heat-treated tool steel wrench features 3-side and 4-side openings.
• Durable plastic handle reverses to provide ideal ergonomics with both openings.
• Precision-cut wrench openings are perfectly sized for fit and speed
