Bike Wheels & Wheelsets

The 454 NSW Tubeless Disc-brake is the ultimate road racing wheelset; aerodynamically efficient and stable in all wind conditions.
• Designed for tubeless tires at lower pressure for reduced rolling resistance and increased vibration damping
• For the best combination of aerodynamics and rolling resistance gains a 28mm tire is recommended.
• ZR1 SL hubset with ceramic bearings and 66 points of engagement.
• SRAM Model ID: WH-454-NTLD-C1

The 858 NSW’s undulating 82mm-85mm deep rim shape is Zipp's highest performing design for aero efficiency and crosswind stability. A tubeless and hookless rim profile provides a seamless tire interface and minimized weight. The 23mm internal width is ideal for running wider tires with lower pressures for decreased rolling resistance.
• Fastest with a 28mm tire
• ZR1 SL hubset with ceramic bearings and 66 points of engagement
• Lifetime Warranty
• SRAM Model ID: WH-858-NTLD-D1

• Designed to take the toughest abuse from DH to park to full power eMTBs
• 0.41 degress of engagement (878 points of contact)
• Approved for full power class 1 E-bikes

• I9 Enduro S rim laced with steel spokes to the Hydra 2 hub
• 041 degrees of engagement (878 points of contact)
• Approved for SL E-bikes (up to 65Nm)

• Triple-cabity rim with hollow bead wall
• Hydra 2 hub with I9 machined aluminum spokes
• 0.41 degrees of engagement (878 points of contact)
• Approved for SL E-bikes (up to 65Nm)

• Rim: WTP 22“ Logic rim, 36h, sleeved
• Salt EX cassette hub, sealed bearings, 14mm crmo axle
• Sealed bearing 9t cassette hub

• Fastest race wheel on gravel, features tubeless and hookless rim profile
• Ultra-wide internal profile for decreased rolling resistance, ability to run pressures under 30psi (max 50psi)
• Wide and deep profile integrates seamlessly with gravel tires to increase aerodynamic efficiency
• ZR1 DB hub with 66 points of engagement
• Center locking rotor interface. Lockring is included with the wheels
• Lifetime Warranty
• COMPATIBLE ONLY WITH APPROVED TIRES. See Zipp.com for list.
• SRAM Model ID: WH-303-XPSW-A1

SOLiX G is built for gravel and adventure, using alumium spokes threaded directly in the hub flange. A continuously-phased five pawl freehub offers 605 points of contact translating to an ultra-fine .59° engagement. Reduced pawl rotation, decreased pawl spring pressure, optimized drive ring diameter, and updated contact seal layout bring resistance and freewheeling noise to a minimum.

SOLiX G is built for gravel and adventure, using alumium spokes threaded directly in the hub flange. A continuously-phased five pawl freehub offers 605 points of contact translating to an ultra-fine .59° engagement. Reduced pawl rotation, decreased pawl spring pressure, optimized drive ring diameter, and updated contact seal layout bring resistance and freewheeling noise to a minimum.

Striking the ultimate balance between weight savings, stability, aerodynamics, and rolling efficiency, the SES 6.7 defines Real-World Fast and raises the bar for modern aero wheel performance. Grams of rim, versus grams of drag, make the SES 6.7 the outright fastest wheel on the road.
• When speed matters most
• INNERDRIVE premium disc road hub
• Centerlock only (lockrings not included)
• 1505-gram wheelset weight (with XDR body) (+/- 2%)
• Inner rim width: 23mm
• Aero optimized tire size: 27mm-28mm (Labeled)
• Minimum labeled tire size: 25mm
• For use with tubeless tires only

When speed across most any terrain is priority number one, look no further than the SES 4.5. Originally designed for the cobbles and crosswinds of Paris-Roubaix to provide an aero benefit with high volume tires, the SES 4.5 was the first of its kind and is now re-designed to deliver more speed in a lighter package.
• Go fast, everywhere
• INNERDRIVE premium disc road hub
• Centerlock only (lockrings not included)
• 1511g Wheelset Weight Avg. (XDR) (+/- 2%)
• Inner Rim Width: 25mm
• Aero optimized tire size: 27mm-28mm
• Minimum labeled tire size: 27mm
• For use with tubeless tires only

Versatile, aero, light, and fast. The SES 3.4 has been a staple in the SES wheel family, and the newest iteration takes the best features of the previous generation SES 3.4 and 3.4 AR to make the ultimate modern road wheelset. There’s simply nothing more versatile than the SES 3.4.
• The one-wheel quiver
• INNERDRIVE premium disc road hub
• Centerlock only (lockrings not included)
• 1455-gram wheelset weight (with XDR body) (+/- 2%)
• Inner rim width: 25mm
• Aero optimized tire size: 27mm-28mm (Labeled)
• Minimum labeled tire size: 27mm
• For use with tubeless tires only

The SES 2.3 is purpose-built for the mountains. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires, the SES 2.3 raises the bar for performance through hilly and mountainous terrain.
NOT FOR OFF-ROAD/GRAVEL USE!
• INNERDRIVE premium disc road hub
• Centerlock only (lockrings not included)
• 1274-gram wheelset weight (+/- 2%)
• Inner rim width: 21mm
• Minimum labeled tire size: 25mm
• For use with tubeless tires only

• Zipp’s lightest disc brake wheel ever is the pinnacle for endurance riders and road racers.
• Sawtooth rim profile for aero efficiency and TSE for all-around speed.
• ZR1 SL hubset with ceramic bearings and 66 points of engagement.
• Zipp AXS Wheel Sensor for accurate on-bike tire-pressure monitoring.
• Optimized for 30mm tires.
• At an ultralight weight, the wheelset is designed for road and is not approved for gravel riding.
• Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
• Center locking rotor interface. Lockring is included with the wheels.
• Lifetime warranty
• 1310g
• SRAM Model ID: WH-353-NSW-B1

• Superior speed on all roads, no matter their surface. The 303 is Zipp’s do-it-all wheelset for road, gravel, cobbles, and cyclocross.
• Low drag and an improved transition between rim and tire, boosting aerodynamic efficiency with wider tires.
• Wide-rim stance also features less tire deflection for reduced rolling resistance.
• The wider tire, increased tire volume, and lower tire pressure helps reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions
• Optimized for tires 30 to 35mm in width, with the best performance at 35mm tires.
• Refined rim shape helps shield the tire in an impact that would otherwise cause a pinch flat.
• Integrated Zipp AXS Wheel Sensor provides accurate real-time tire pressure monitoring.
• ZR1 hubset
• Lifetime warranty
• 1440g
• SRAM Model ID: WH-303-SW-A1

Riding is believing with the Zipp 1ZERO HITOP SW MTB wheelset when it comes to making you faster. Trail compliance is vital, with modern cross-country races becoming rougher and more challenging. No longer is it good enough for an XC wheelset to be stiff above all else.
The 1ZERO HITOP SW carbon rim complies with the terrain thanks to Zipp’s proprietary HITOP Technology for carbon layup. The result is a lightweight XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel.
• ZM2 SL hubset, with 66 points of engagement, ensures you’ll be quick to accelerate and back on the pedals sooner after corners with the 1ZERO HITOP SW.
• The winged rim provides a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit
• TyreWiz 2.0 tire-pressure monitoring system included
• Lifetime Warranty
• SRAM Model ID: WH-1ZRO-HTSW-A1

The 1ZERO HITOP S wheelset melds high value with high performance for a better and faster ride. The 1ZERO HITOP S carbon rim complies with the terrain thanks to Zipp’s proprietary HITOP Technology. The result is a light XC race or adventure wheel that carries speed through all sections of the trail, rocks, roots, and rutswith the durability required for a trail bike with up to 130mm of travel.
• The winged rim top provides a smooth resting surface for the tire, reducing the chance
of pinch flats after a rock hit
• ZM 900 hub with 52 points of engagement for fast acceleration
• TyreWiz tire-pressure monitoring system sold separately
• Lifetime warranty
• SRAM Model ID: WH-1ZRO-HTS-A1

• The Enduro 300 reaches higher with an aluminum triple-cavity rim featuring a hollow bead
wall extrusion
• Designed to shrug off impacts and protect tires from associated pinch flats
• The bead wall and the bead shelf exhibit significant improvements in dent resistance vs. previous Enduro rims
• Built around the 32h Hydra aluminum spoke chassis
• Warp speed engagement and responsive handling meets hard-charging hollow bead wall rim to create the latest in a proud lineage - the Industry Nine Hydra Enduro300.

• Light and capable Gravel rim optimized for wide tires between 40-60mm width
• 25mm internal width 6061-T6 Aluminium Rims (650b), 21mm internal on 700c rim
• Asymmetric design
• Tubeless ready

• Replacement front wheel for Roam Scooter

Rims: WTB DX18 26''
• ETRTO 559-18
• Inner width: 18 mm
• Anodized black finish
• CNC machined sidewalls
• Stainless steel eyelets
• Rim wear indicator
• Pinned joint
• Drilled for Schrader valve
• 36 holes

Front hub: Shimano HB-QC300
• 9x100mm
• Center Lock Disc Mount
• Adjutable Cup & Cone
• Contact sealed hub
• Quick Release Binder included

Rear hub: Shimano FH-QC300
• 10x135mm
• Center Lock Disc Mount
• Adjutable Cup & Cone
• Contact sealed hub and freehub body
• Quick Release Binder included
• Compatible with 8/9/10/11 speed MTB

Assembled in North America by experienced wheelbuilders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

• Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery
• Reinforced by our proven Dual I-Beam support
• 30mm internal rim width
• High-quality EZO bearings
• Choose Proterra when you need a wheel that won't let you down
• Trail / Enduro

• The unasumming, but advanced 1/1 Road drive mechanism keeps pedal power transfer consistent and predictable, available at a split seconds calling courtesy of the 4 degree hub engagement
• With a 24.5mm inner rim design, the 700c GRCX rim shines on rides that see both road and gravel
• Perfect for backcountry or touring adventures, 1/1 Road brings Industry Nine performance to new riders and new routes

• TSE design with 23mm internal width with tubeless and hookless rim profile ideal for wider tires at lower tire pressure
• Minimum 25mm tire width
• More than 300 g lighter than previous model
• ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement
• An all-out aero 80mm rim profile
• ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel
• Center locking rotor interface. Lockring is included
• Lifetime warranty
• SRAM Model ID: WH-808-FTLD-B1

• The Prologue Series is a series of budget-friendly, economical wheel builds.
• By utilizing a more automated layup process (which adds approximately 20 grams per rim), costs are kept down to spec a wheelset that has incredible performance for half to one-third of the costs of premium models.
• The Prologue rims feature a hooked tire interface so you can use any tire brand at any pressure and not worry about the catastrophic tire blow-offs that a road hookless rim can suffer.
• All Prologue series wheels come with the Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings.
• Built with Pillar Aero 1423 spokes and external brass nipples, the Prologue is built to be a great budget upgrade that can be used for everyday riding.

• The Prologue Series is a series of budget-friendly, economical wheel builds.
• By utilizing a more automated layup process (which adds approximately 20 grams per rim), costs are kept down to spec a wheelset that has incredible performance for half to one-third of the costs of premium models.
• The Prologue rims feature a hooked tire interface so you can use any tire brand at any pressure and not worry about the catastrophic tire blow-offs that a road hookless rim can suffer.
• All Prologue series wheels come with the Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings.
• Built with Pillar Aero 1423 spokes and external brass nipples, the Prologue is built to be a great budget upgrade that can be used for everyday riding.

• The Ultra-light carbon XC wheel
• Hookless rim wtih an internal width of 26mm, mates perfectly with fast rolling cross-country tires ranging from 2.1” to 2.4”.
• Quest Disc MTB hubs (120 grams for the front and 245 grams for the rear) with their super quick five-degree engagement, tool free service and centerlock spline for disc brake rotors.
• Pillar Wing 20 J-Bend spokes and alloy nipples are laced double-cross with 24 spoke front and 28 spoke rear.
• The ultra-light, yet durable, 370-gram rim measures 26mm internal, featuring a 2.8mm offset rim bed for better tension balance and a more responsive wheel build.
• These specs total up to a 1380-gram wheelset that has a modern day wider rim design and can handle the rigors of cross country mountain bike riding.

• 30mm wide rim with an Enduro style layup. Designed for tires in the 2.4 to 2.7 range.
• Offset rim bed for balanced spoke tension.
• Tripel hub with quick 3.5 degree engagement, and super low drag.
• Super strong hookless rim

• Quest centerlock hubs, Pillar Wing 20 spokes, and external nipples for the ideal gravel wheel set, built to withstand your hardest rides on your most adventurous weekends!
• Wide rim platform for modern gravel tires.
• Boasting a 26mm internal width, the updated Jocassee goes to a shallower and lighter 25mm depth. This allows the rim weight to go down to 353 grams in a 700c.