Products

• RockShox, 00.4315.032.400, Basic service kit, 30 Gold A12014+,
• SRAM Model ID: FS-SVC-200H-A1

• FORK DAMPER ASSEMBLY - CROWN TURNKEY 26,27.5,29 80-100mm (INCLUDES RIGHT SIDE INTERNALS) - 30 GOLDA1

• FORK DECAL KIT - 30/32mm MY18 - SID/REBA/REVELATION(PRE-2018)/SEKTOR/RECON/XC32/30G/30S/XC30
• SRAM Model ID: FS-SPP-A0

• 7-piece screwdriver set with Kraftform Plus handle
• Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer.
• Includes tools with Lasertip blades: The tip clings to the screw head and prevents it slipping out.
• Take it easy tool finder with colour coding and size stamping
• The anti-roll protection
• Include: Scewdriver (PH 1,2) (PZ 2) (TX 15,20,25) (Flat 0.8x4mm), Textile Case

• Application-specific mixture of workshop screwdrivers with normal long blade and especially small Stubby screwdrivers with short blade for hard to reach areas.
• The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working.
• The blades have all the benefits of the Wera Bit technology.
• Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.
• The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace.
• Included: Stubby (PH 1,2), Long (PH 1,2) (Flat 0.5x3mm, 1x5.5mm and 2x6.5mm), Wall Rack

• Ideal-for-every-terrain 45mm rim depth with a significantly wider internal width to provide greater performance and ride quality in almost every measurable way
• Optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide
• 27mm outer width, and 23mm internal
• 76 / 176 DB hubs with Center locking interface
• SRAM Model ID: WH-303-STLD-A1

• Wheel Decal Kit - Zipp 303 Silver Foil - Single Wheel - Wrap Around Graphics
• SRAM Model ID: WH-SPP-A0

• Wheel Decal Kit - Zipp 303 SW - Single Wheel - Wrap Around Graphics
• SRAM Model ID: WH-SPP-A0

• Superior speed on all roads, no matter their surface. The 303 is Zipp’s do-it-all wheelset for road, gravel, cobbles, and cyclocross.
• Low drag and an improved transition between rim and tire, boosting aerodynamic efficiency with wider tires.
• Wide-rim stance also features less tire deflection for reduced rolling resistance.
• The wider tire, increased tire volume, and lower tire pressure helps reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions
• Optimized for tires 30 to 35mm in width, with the best performance at 35mm tires.
• Refined rim shape helps shield the tire in an impact that would otherwise cause a pinch flat.
• Integrated Zipp AXS Wheel Sensor provides accurate real-time tire pressure monitoring.
• ZR1 hubset
• Lifetime warranty
• 1440g
• SRAM Model ID: WH-303-SW-A1

• Fast and robust gravel wheel, features tubeless and hookless rim profile
• Ultra-wide internal profile for decreased rolling resistance, ability to run pressures under 30psi (2.1 bars)
• Wide and deep profile integrates seamlessly with gravel tires to increase aerodynamic efficiency
• 76 / 176 DB hubs with Center locking interface
• Max tire pressure 50 psi/3.45 bar
• Lifetime Warranty
• COMPATIBLE ONLY WITH APPROVED TIRES. See Zipp.com for list.
• SRAM Model ID: WH-303-XPS-A1

• Wheel Decal Kit Zipp 303 XPLR S Single Wheel Wrap Around Graphics

• Fastest race wheel on gravel, features tubeless and hookless rim profile
• Ultra-wide internal profile for decreased rolling resistance, ability to run pressures under 30psi (max 50psi)
• Wide and deep profile integrates seamlessly with gravel tires to increase aerodynamic efficiency
• ZR1 DB hub with 66 points of engagement
• Center locking rotor interface. Lockring is included with the wheels
• Lifetime Warranty
• COMPATIBLE ONLY WITH APPROVED TIRES. See Zipp.com for list.
• SRAM Model ID: WH-303-XPSW-A1

• Wheel Decal Kit Zipp 303 XPLR SW Single Wheel Wrap Around Graphics

• Zipp 303 XPLR Tubeless Tape Kit - Width 34mm Length 10m (Includes Tubeless Tape For 2 Wheels)

• Single 30mm open bore drift for use with 1/2" rods

• Fork Lower Leg Dust Seal Installation Tool 30mm (for flangeless and flanged dust seals)
• SRAM Model ID: TL-FST-S30-A1

• Sealed bearing extractor for 30mm ID bearings. Extractor has 1/2" thru hole for use with 1/2" threaded rod press handles.
• This extractor is part of a system that requires additional pieces to function. See wheelsmfg.com for details.

• Rear Shock 31mm Flat Wrench (Crowfoot Compatible) - Vivid Air Reservoir
• SRAM Model ID: TL-RST-W31-A1

• FORK DUST WIPER KIT - 32mm BLACK (INCLUDES FLANGED DUST WIPERS) (QTY 20) - REVELATION A3/SID A1-A3 /REBA A1-A4
• SRAM Model ID: FS-SPP-A0

• Fork Lower Leg Dust Seal Installation Tool 32mm (for flangeless and flanged dust seals)
• SRAM Model ID: TL-FST-S32-A1

• RockShox, 11.4310.290.000, Dust Seal/ Foam Ring Kit
• SRAM Model ID: FS-SPP-A0

• FORK FOAM RING KIT - 32mm X 4mm (QTY 20) - SID RLC A1/SID XX/RL B1 (2017+)/RECON BOOST RL C1/TK B1 (2020+)
• SRAM Model ID: FS-SPP-A0

• FORK FOAM RING KIT - 32mm X 5mm (QTY 20) - SID A1-A3 /REBA A2-A3/BLUTO A1/SID SL C1 (2021)
• SRAM Model ID: FS-SPP-A0

• 6-piece screwdriver set with Kraftform Plus handle
• Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
• ''Take it easy'' Tool Finder: colour coding according to profile and size.
• The hexagonal anti--roll feature
• Includes practical rack for tidy storage of the screwdrivers.

• Chain Ring MTB 34T 104 AL5 Blast Black 2x10 Medium Pin
• SRAM Model ID: CR-MLEG-104-A1

• FORK SPRING DEBONAIR ASSEMBLY - 100-160mm (INCLUDES TOP CAP, DEBONAIR SPRING, TRAVEL SPACERS & SHAFT BOLT) - 35G A1 (2020+)
• SRAM Model ID: FS-SPP-A0

• 200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Rings Seals) - 35 Gold RL A1 (2020+)
• SRAM Model ID: FS-SVC-200H-A1

• 200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Rings Seals) - 35 Silver R/Tk A1 (2021)
• SRAM Model ID: FS-SVC-200H-A1

• High quality Kraftform Plus screwdrivers.
• Multi-component Kraftform Plus handle
• Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
• The tips are microscopically roughened for optimal bite to the screw.
• ''Take it easy'' tool finder with colour coding according to profiles and size stamp
• The hexagonal anti-roll feature

• Small screwdrivers with short blades for hard to reach areas
• The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working
• Wera Bit technology
• Special surface treatment of the blades for high corrosion protection
• The hexagon anti-roll protection