Products

• High quality Kraftform Plus screwdriver.
• Multi-component Kraftform handle for fast and low-fatigue working.
• Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
• The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling ''round the corner'' screwdriving.
• ''Take it easy'' tool finder with colour coding according to profiles and size stamp – for simple and rapid accessing of the required tool.
• The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.

• Undulating 45-mm deep rim shape provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability
• Hookless rims for a seamless, aerodynamic transition between tire and rim
• Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses
• 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride.
• Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction as well as improved durability.
• Optimized tire bed for easy tire installation
• Center locking rotor interface. Lockring is included with the wheels
• 1255g
• Lifetime warranty
• SRAM Model ID: WH-353-NTLD-A1

• Zipp’s lightest disc brake wheel ever is the pinnacle for endurance riders and road racers.
• Sawtooth rim profile for aero efficiency and TSE for all-around speed.
• ZR1 SL hubset with ceramic bearings and 66 points of engagement.
• Zipp AXS Wheel Sensor for accurate on-bike tire-pressure monitoring.
• Optimized for 30mm tires.
• At an ultralight weight, the wheelset is designed for road and is not approved for gravel riding.
• Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
• Center locking rotor interface. Lockring is included with the wheels.
• Lifetime warranty
• 1310g
• SRAM Model ID: WH-353-NSW-B1

• High quality Kraftform Plus screwdriver.
• Multi-component Kraftform handle for fast and low-fatigue working.
• Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
• Hex-Plus offers a larger contact surface within the screw head.
• This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess.
• ''Take it easy'' Tool Finder: colour coding according to profile and size.
• The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.

• High quality Kraftform Plus screwdrivers.
• Multi-component Kraftform Plus handle
• Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
• Lasertips microscopically roughened for optimal bite to the screw.
• ''Take it easy'' tool finder with colour coding according to profiles and size stamp
• The hexagonal anti-roll feature

• RockShox, 11.4015.361.000, 35mm upper tube/frame bumper stop qty 2 Boxxer
• SRAM Model ID: FS-SPP-A0

• carbon
• length 35mm
• round and square gasket
• 1 pair in M-Wave box
• for FV
• with seal ring

• FORK DECAL KIT - 35mm MY18 - PIKE/LYRIK/YARI/DOMAIN/REVELATION(2018+)
• SRAM Model ID: FS-SPP-A0

• Fork Lower Leg Dust Seal Installation Tool 35mm (for flangeless and flanged dust seals)
• SRAM Model ID: TL-FST-S35-A1

• High quality Kraftform Plus screwdriver.
• Multi-component Kraftform handle for fast and low-fatigue working.
• Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
• Holding function
• Anti-roll feature prevents any bothersome rolling away at the workplace.
• Handle markings for simplified finding and sorting of the tool.

• 7-piece screwdriver set for TORX screws.
• Multi-component Kraftform handle for fast and low-fatigue working.
• Holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool.
• Hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.
• Handle markings for simplified finding and sorting of the tool.

• SRAM, 36T, 10 sp, BCD 104mm, 4-Bolt, Outer Chainring, For MTB double, Aluminum, Black, 11.6215.188.320
• SRAM Model ID: CR-MLEG-104-A1

• Adapts the BB86 bottom bracket to fit FSA 386 EVO cranksets. -01
• Adapters are conical alloy spacers which allow BB386EVO cranksets to fit into 68mm wide BB shells with BB30 or PF30 bearings installed. -02
• Aluminum
• Black anodized-01
• Adapts the BB86 bottom bracket to fit FSA 386 EVO cranksets.
-02
• Adapters are conical alloy spacers which allow BB386EVO cranksets to fit into 68mm wide BB shells with BB30 or PF30 bearings installed
• Aluminum
• Black anodized

Thread together BB for 386EVO frames and 29mm spindle diameter SRAM DUB compatible cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance.

• Thread together BB for 386EVO frames and Praxis M30 28/30mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance.

• Threaded BB for 386EVO frames
• Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.

• Theaded BB for 386 EVO frames
• -01: 24mm (Shimano) diameter spindle crank
-02: 22/24mm (SRAM) diameter spindle crank
• Machined cups thread together for stability, increased bearing life and simple installation and maintenance
• Weight: -01:133g, -02: 145g

• 386EVO-SHIMANO includes:
• 2 x 24mm ID adapters and 8 x 0.7mm spacers
• 386EVO-SRAM includes:
• 1 x 24mm ID adapter (for right-side), 1 x 22mm ID adapter (for left-side) and 8 x 0.7mm spacers
• Material: Delrin
• 48g/pr

• Use to install dust seals for forks with 38mm upper tubes
• SRAM Model ID: TL-FST-S38-A1

• High quality L-key set out of stainless steel for hexagon socket screws.
• Stainless steel prevents the transfer of extraneous rust.
• The Hex-Plus profile offers a greater contact surface in the head of the screw.
• The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated.
• Come with hex ballpoint on the long arm
• ''Take it easy'' Tool Finder: colour coding according to size.
• With L-key clip fastener.

• SRAM, 39T, 10 sp, BCD 120mm, 4-Bolt, All 26/39, Outer Chainring, For S-pin BB30 2x10, Aluminum, Black, 11.6215.188.270
• SRAM Model ID: CR-MLEG-120-A1

• SRAM, 39T, 10 sp, BCD 120mm, 4-Bolt, All 26/39, Outer Chainring, For L-pin GXP 2x10, Aluminum, Black, 11.6215.188.260
• SRAM Model ID: CR-MLEG-120-A1

• Total Leatt® protection score of 11 points
• 3DF ventilated soft impact foam
• Anti-odor MoistureCool and AirMesh wicking fabrics
• Pre-curved design for better fit and function
• Anti-slip forearm X-strap with silicone bicep lining
• Abrasion resistant Aramid outer layer for durability
• Single sizing for a perfect fit
• Silicone printed elbow grip
• CE tested and certified as impact protection: Elbow EN1621-1
• Weight: from 350g (0.77lbs) pair

• Total Leatt® protection score of 13 points
• 3DF ventilated soft impact foam
• Pre-curved 3D design for optimal fit and function
• Anti-odor MoistureCool and AirMesh wicking fabrics
• Increased side protection
• 25% slimmer CE impact certified profile
• Abrasion resistant Aramid outer layer for durability
• Wider, silicone printed elastic cuffs
• 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs
• All protection materials perforated for ventilation
• CE tested and certified as impact protection: Knee EN1621-1
• Weight: 450g (pair)

• Total Leatt® protection score of 13 points
• 3DF ventilated soft impact foam
• Pre-curved 3D design for optimal fit and function
• Anti-odor MoistureCool and AirMesh wicking fabrics
• Increased side protection
• 25% slimmer CE impact certified profile
• Abrasion resistant Aramid outer layer for durability
• Wider, silicone printed elastic cuffs
• 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs
• All protection materials perforated for ventilation
• CE tested and certified as impact protection: Knee EN1621-1
• Weight: 450g (pair)

• Total Leatt® protection score of 13 points
• Soft elbow guard with hard shell forearm sliders
• 3DF AirFit ventilated soft impact foam
• CE tested and certified as impact protection: Elbow EN1621-1
• Improved hard shell sliding forearm
• Anti-slip forearm X-strap with silicone bicep lining
• Anti-odor MoistureCool and AirMesh wicking fabrics
• Abrasion resistant Aramid outer layer for durability
• Silicone printed elbow grip
• Our 3D design ensures a great fit that is very comfortable
• Weight: from 300g (0.66lbs) pair

• The new Lizard Skins 3DGRP is created by Carbon® utilizing their Digital Light
Synthesis technology. DLS is a production method using programmable liquid resins,
digital ultraviolet light projection and oxygen permeable optics in order to create
pieces with superb performance and surface finish. Using these advancements in 3D
printing, the newly developed grip unrestrained by traditional manufacturing methods
and materials will help you take your ride to the next level.
• Length: 133mm
• Diameter: Medium 32mm
• Weight: 68g

• Neoprene cover offers protection for the suspension mechanism and elastomers
• Hook and look fastening for quick installation

• Single-wall Moto Technology™ allows the rim to “pivot” from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension.
• Higher impact resistance
• Reduced chance of pinch flatting
• More traction in rough corners
• Smoother ride in rocky terrain
• Ability to run lower tire pressure
• Reduced rider fatigue
• Rim profiles and graphics are asymetrical, leading to separate front and rear SKUs. Interchanging front and rear rims is possible, and will only result in "backwards" graphics.
• Includes nipple washers, tubeless valve and tape
• SRAM Model ID: RI-MOTO-30-A1

• Moto Technology’s single-wall rim is the optimal approach for an enduro/trail wheelset
• The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction, providing higher impact resistance, reducing pinch flats, and reduced rider fatigue
• Frustration-free tire installation
• German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability
• Lifetime Warranty
• SRAM Model ID: WH-MOTO-30-B1