Products

Cane Creek’s 40-Series sets the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset.

Consistent graphics, interchangeable parts and over 40 configurations to meet almost every size need. Sold in straight and tapered assemblies or tops & bottoms, tops are available in either short (9mm) or tall (15mm) stack height bearing covers. Precision engineered by Cane Creek in Fletcher, NC.

• 40-Series Represents the Perfect Balance of Performance, Durability and Value
• Internally Contoured 6061-T6 Aluminum Cups and Cover
• Innovative Clip-Seal Seals the Top Assembly and Captures the Compression Ring
• Interlok Spacer Compatible
• Sealed Black Oxide Steel Cartridge Bearing
• Consistent Stack Heights Across 10, 40 and 110-Series
• Internal Parts Are Cross-Compatible Across 10, 40 and 110-Series

Replacement top cover for 40 Series ZS44 headsets

Cane Creek’s 40-Series sets the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset.

• 40-Series Represents the Perfect Balance of Performance, Durability and Value
• 6061-T6 Aluminum Cover
• Innovative Clip-Seal Seals the Top Assembly and Captures the Compression Ring
• Interlok Spacer Compatible
• Sealed Black Oxide Steel Cartridge Bearing
• Consistent Stack Heights Across 10, 40 and 110-Series
• Internal Parts Are Cross-Compatible Across 10, 40 and 110-Series

• 40-Series Represents the Perfect Balance of Performance, Durability and Value
• Internally Contoured 6061-T6 Aluminum Cups and Cover
• Innovative Clip-Seal Seals the Top Assembly and Captures the Compression Ring
• Interlok Spacer Compatible
• Sealed Black Oxide Steel Cartridge Bearing
• Consistent Stack Heights Across 10, 40 and 110-Series
• Internal Parts Are Cross-Compatible Across 10, 40 and 110-Series

• 40-Series Represents the Perfect Balance of Performance, Durability and Value
• Internally Contoured 6061-T6 Aluminum Cups and Cover
• Innovative Clip-Seal Seals the Top Assembly and Captures the Compression Ring
• Interlok Spacer Compatible
• Sealed Black Oxide Steel Cartridge Bearing
• Consistent Stack Heights Across 10, 40 and 110-Series
• Internal Parts Are Cross-Compatible Across 10, 40 and 110-Series

• 40-Series Represents the Perfect Balance of Performance, Durability and Value
• Tops and Bottoms Sold Separately As Part of Cane Creek's Tapered Headset Solution
• Sealed Black Oxide Steel Cartridge Bearing
• Durable Steel Crown Race with Low-Friction Face-Seals
• Consistent Stack Heights Across 10, 40 and 110-Series
• Internal Parts Are Cross-Compatible Across 10, 40 and 110-Series

• 40-Series Represents the Perfect Balance of Performance, Durability and Value
• Tops and Bottoms Sold Separately As Part of Cane Creek's Tapered Headset Solution
• Sealed Black Oxide Steel Cartridge Bearing
• Durable Steel Crown Race with Low-Friction Face-Seals
• Consistent Stack Heights Across 10, 40 and 110-Series
• Internal Parts Are Cross-Compatible Across 10, 40 and 110-Series

• Easily replaceable, sealed cartridge bearings
• 6000 series alloy cups and materials
• Sealed steel crown race
• ZN40 Bearings

• 40-Series Represents the Perfect Balance of Performance, Durability and Value
• Internally Contoured 6061-T6 Aluminum Cups and Cover
• Innovative Clip-Seal Seals the Top Assembly and Captures the Compression Ring
• Interlok Spacer Compatible
• Sealed Black Oxide Steel Cartridge Bearing
• Consistent Stack Heights Across 10, 40 and 110-Series
• Internal Parts Are Cross-Compatible Across 10, 40 and 110-Series

Cane Creek’s 40-Series sets the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset.

• Easily replaceable, sealed cartridge bearings
• 6000 series alloy cups and materials
• Sealed steel crown race
• ZN40 Bearings

• Torque indicator with fixed torque for hexagon sockets.
• Tamper proof.
• Robust slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached
• No additional tools are needed for loosening screw connections.
• Handle fills the whole hand well and the fingers lie in the softly rounded recessed grips.

• Mini and standard version
• 10mm Round Shackle
• Double Locking
• Laser cut key cylinder
• SH34 carrier

• Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile
• Optimized tire bed for easy tire installation
• Wide 23mm rim profile creates a better tire interface to be fast on or off the road
• New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement
• Ships with 12mm front and rear end caps
• Center locking rotor interface. Lockring is included with the wheels
• 1470g
• Lifetime warranty
• SRAM Model ID: WH-404-FTLD-B1

• Wheel Decal Kit - Zipp 404 Silver Foil - Single Wheel - Wrap Around Graphics
• SRAM Model ID: WH-SPP-A0

• T-handle shape to allow high torque transmission in difficult tightening and loosening situations.
• Ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses.
• Bit holder for bits with 1/4'' hexagon drive
• Rapidaptor technology for lightning-fast bit changes.

• The integrated ratchet with fine toothing ensures fast and safe working
• Reversing lever for comfortable clockwise/counterclockwise direction change
• Convenient working thanks to the ratchet mechanism fully embedded in the handle
• Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working
• Fast-rotating sleeve for extremely high working speed
• Rapidaptor bitholding screwdriver with fast-rotating sleeve for lightning-fast bit changes and high working speeds
• For bits with 1/4" external hexagon drive

• SRAM, 42T, 10 sp, BCD 120mm, 4-Bolt, All 28/42, Outer Chainring, For L-pin GXP 2x10, Aluminum, Black, 11.6215.188.240
• SRAM Model ID: CR-MLEG-120-A1

• We protect our most valuable possessions with an alarm system, here is how to do it for your bike.
• Hardened 12mm round shackle
• The shackle, the body and the load-bearing parts of the locking mechanism are manufactured using specially hardened steel
• Special, modern design of the lock body casing allows for optimum handling
• High-quality locking cylinder for high protection against manipulation, e.g., picking
• Alarm at a volume of at least 100 dB for 15 seconds, followed by automatic reactivation
• 3D Position Detection – detects vibrations and the smallest of movements in all three dimensions and triggers an alarm
• CR2 batteries included

The 454 NSW Tubeless Disc-brake is the ultimate road racing wheelset; aerodynamically efficient and stable in all wind conditions.
• Designed for tubeless tires at lower pressure for reduced rolling resistance and increased vibration damping
• For the best combination of aerodynamics and rolling resistance gains a 28mm tire is recommended.
• ZR1 SL hubset with ceramic bearings and 66 points of engagement.
• SRAM Model ID: WH-454-NTLD-C1

• T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations.
• The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses.
• The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided.
• Holding function (HF) to securely hold the hexagon socket screw on the tool (except size 2 and 2.5mm)
• Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.

• T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations.
• The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses.
• The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided.
• Holding function (HF) to securely hold the hexagon socket screw on the tool (except size 2 and 2.5mm)
• Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.
• -01 includes the following: 2.5, 3, 4, 5, 6, 8, 10mm

• T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations.
• The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses.
• The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided.
• Holding function (HF) to securely hold the TORX screw on the tool.
• Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.

• Lightweight plastic construction
• Easy to operate
• Barrel is 22 x 330 mm
• Handle with spring is 29 x 92 mm
• Black

• Good protection for low to medium theft risk
• 8.5mm steel shackle
• Compatible with adapter cables and chains
• Includes two (2) keys

• The 494 grip is a single compound grip that has a pattern that closely resembles our most popular selling grip the Peaty grip
• Santa Cruz Bikes will use this grip for bike builds
• Length - 130mm
• Diameter - 31.5mm
• 97g

• Longer artwork, ideal fit for down tube and top tube
• 5 high quality stickers, perfect for outdoor usage

• Inline barrel adjusters for 4mm housing
• SRAM Model ID: AC-MGT-CBL-A1